In Stock SKU: HE-8673

Cummins Euro 5 AdBlue SCR Removal Emulator

An ECU-compatible plug-in emulator that permanently resolves AdBlue/SCR aftertreatment faults and power restrictions on Cummins Euro 5 trucks and semi-tractors, with no wiring modifications.

250 $
Free worldwide shipping · fast delivery
1
Free Shipping
2-Year Warranty
Easy returns
Secure Payment

The Cummins Euro 5 AdBlue Removal Emulator is purpose-built for heavy-duty trucks, coaches and semi-tractors powered by Cummins Euro 5 engines. The Euro 5 SCR aftertreatment system — spanning the AdBlue dosing pump through to the NOx sensor array — is a common source of fault chains that can leave a Cummins vehicle in limp mode or stranded at the roadside. This ECU-compatible plug-in device fully simulates the SCR system's sensor outputs, permanently eliminating fault codes and power restrictions so the truck stays on the road and productive.

How Does It Work?

The emulator connects directly to the OEM AdBlue/SCR connector on the Cummins Euro 5 vehicle — no wires are cut and the factory loom is untouched. Once live, the device simultaneously generates simulated signals for AdBlue level, temperature and quality sensors, NOx upstream and downstream sensors, and SCR catalyst temperature. These signals are transmitted to the ECU continuously. Because the ECU sees a complete, valid data set from every aftertreatment sensor, it registers no fault conditions, issues no DTC codes and applies no power derate — traction performance is fully maintained.

AdBlue and SCR system fault and warning lights are permanently extinguished
Engine power derate and limp-mode caused by SCR faults are eliminated
AdBlue/DEF consumption stops; the vehicle operates without the fluid
NOx sensor and exhaust aftertreatment fault codes are no longer generated
The emulator causes no mechanical damage to the vehicle
The Cummins Euro 5 engine continues to run at normal performance parameters

Frequently Asked Questions

How does the emulator achieve ECU compatibility on Cummins Euro 5 vehicles?

The emulator is developed using protocols matched to Cummins Euro 5 ECU specifications. When connected to the factory socket the ECU recognises the device as genuine system components and raises no incompatibility codes.

Is any additional procedure needed after installation?

In most cases no further action is required. The emulator becomes active immediately on connection. On some vehicles a one-time fault memory clear via a diagnostic tool may be advisable to remove pre-existing stored codes.

What warranty and support is provided?

All our emulators carry a warranty. Free technical support is available for product-side issues throughout the warranty period, and a replacement unit is supplied where necessary.

Is shipping free?

Yes, shipping is free on all orders, with fast delivery across Türkiye and worldwide.