Ford Transit SID213 AdBlue SCR DPF Removal Emulator
The Ford Transit SID213 emulator simulates AdBlue SCR and DPF systems using SID213-native protocols, permanently removing fault warnings and engine power restrictions without touching the factory wiring.
The Ford Transit SID213 ECU uses a different hardware architecture and communication protocol from SID212, which means it demands its own dedicated emulator with SID213-native simulation algorithms. If your Transit is throwing recurring AdBlue (DEF) or DPF fault codes under a SID213 unit, this is the correct plug-in device. Developed specifically for the SID213 platform, this AdBlue SCR + DPF Removal Emulator permanently ends the cycle of SCR and DPF-related breakdowns that interrupt urban delivery, rental, and light-commercial operations — no software intervention, no wiring changes.
How Does It Work?
The emulator connects to the original AdBlue and DPF data sockets on the SID213 ECU without cutting or soldering a single wire. Using SID213-native communication protocols, it continuously produces all required signals: upstream and downstream NOx readings, AdBlue dosing pump and injector feedback, AdBlue level, temperature and quality values, and DPF differential pressure data. The engine management unit accepts these as valid system inputs and generates neither fault codes nor any operating restriction.
Frequently Asked Questions
Can the SID212 and SID213 emulators be used interchangeably?
No. SID212 and SID213 are two distinct ECU generations with different hardware and communication protocols. Each requires its own dedicated emulator — using the wrong one will leave fault codes unresolved.
How straightforward is the installation?
Very straightforward. The emulator plugs into the original AdBlue socket using a plug-and-play connector — no software update, wire cutting, or soldering is involved. After fitting, drive the vehicle briefly to confirm all fault codes are cleared.
Is this emulator exclusive to the Ford Transit?
This product is developed for Ford Transit models equipped with the SID213 ECU. Other Ford models may carry different ECU versions; please supply your ECU code so we can confirm compatibility.
Do you ship internationally?
Yes, international shipments are fully supported. Delivery timescales depend on the carrier and destination country.
Supported Models
This emulator is compatible with the following models that share the same ECU platform:
Installation Video
Step-by-step installation — plug-and-play with no cutting or soldering. About 10 minutes.
