Euro 6 Caffini Euro 6 AdBlue SCR Removal Emulator
A plug-in AdBlue SCR removal emulator for Caffini self-propelled sprayers — permanently eliminates SCR faults and the power derate that stops the machine during critical spray windows.
Caffini self-propelled sprayers are built to cover large acreages at pace during narrow application windows dictated by weather and crop growth stage — there is simply no room for unplanned stoppages. Yet the Euro 6 SCR system fitted to these machines can trigger power derate through urea dosing irregularities, NOx sensor drift, and DEF quality alarms precisely when the sprayer is mid-field and most needed. A machine losing speed and boom pressure in the middle of a treatment pass does not just miss that day's application — it can push back the entire seasonal programme. The Caffini Euro 6 AdBlue (SCR) Removal Emulator resolves these SCR-related faults permanently at the electronic level, so the machine stays in the field and on schedule.
How Does It Work?
The emulator mounts directly onto the engine control module connector via the factory socket — no cables are cut and no soldering is required. Once connected it continuously feeds the control module with upstream and downstream NOx values, urea dosing pump feedback, and SCR catalyst efficiency signals, all held within the expected operating range. The control module reads the aftertreatment system as fully functional, raises no fault codes, and does not engage power restriction mode. The emulator can be removed at any time to restore the machine to its factory configuration.
Frequently Asked Questions
Does the emulator work on all Caffini sprayer models?
It is compatible with Caffini self-propelled machines fitted with an SCR aftertreatment system. We recommend verifying your machine's engine and control module type from service documentation or via an OBD diagnostic tool before installation.
Can installation be carried out in the field and how long does it take?
Yes. The plug-and-play design means it fits the relevant connector in minutes — no wire cutting, soldering, or software intervention is needed, so field installation is straightforward.
Can the emulator be removed later?
Yes. Removing the emulator and reconnecting the original connector returns the machine to its factory configuration with no permanent changes.
What should users be aware of legally?
Disabling an emission control system may be subject to regulations in your region. This product is supplied for off-road, enclosed-site, and test use; assessing legal compliance is the responsibility of the end user.
