Citroën Jumper Euro 6 AdBlue SCR Removal Emulator
Citroën Jumper Euro 6 AdBlue SCR removal emulator — simulates NOx sensor, urea pump and SCR catalyst signals to permanently clear fault codes and prevent engine restrictions with no wiring changes.
The AdBlue SCR system fitted to Euro 6 versions of the Citroën Jumper can trigger unexpected engine restrictions due to NOx quality warnings, pump failures or drops in SCR catalyst efficiency — interrupting commercial operations at the most inconvenient times. This emulator has been developed specifically for Citroën Jumper AdBlue delete requirements, fully simulating every SCR signal so the ECU registers clean, fault-free operation at all times. With the Citroën Jumper SCR removal emulator in place, the van continues delivering uninterrupted commercial service with no AdBlue top-ups and no costly catalytic system maintenance.
How Does It Work?
The emulator plugs into the original AdBlue SCR connector on Citroën Jumper Euro 6 models using the factory socket — no wiring changes, no wire cutting and no ECU software intervention are required. The device electronically generates the urea dosing pump run signal, NOx sensor upstream and downstream data, and SCR catalyst temperature feedback that the ECU expects, so the control unit accepts the system as fully operational and raises no fault codes.
Frequently Asked Questions
Which Citroën Jumper Euro 6 variants does this emulator fit?
It is compatible with Citroën Jumper Euro 6 diesel models equipped with an AdBlue SCR system. We recommend sharing your ECU code and VIN to confirm exact fitment, as separate emulator variants exist for different ECU hardware configurations.
Are any changes made to the van's wiring during installation?
No. The emulator fits onto the original AdBlue socket using a plug-and-play connection. No wire cutting, soldering or ECU software modifications are performed, and all original hardware is preserved.
Do I need a separate tool to clear existing fault codes?
After fitting the emulator, any stored fault codes should be cleared with a standard OBD2 scanner. Once the emulator is active, AdBlue and SCR-related faults will not reappear.
What are the warranty and delivery terms?
All our products carry a 2-year warranty. Please review our returns and warranty policy for full details on coverage and international delivery options.
Supported Models
This emulator is compatible with the following models that share the same ECU platform:
Installation Video
Step-by-step installation — plug-and-play with no cutting or soldering. About 10 minutes.
