MD1CS006 Dacia Dokker MD1CS006 AdBlue SCR + DPF Removal Emulator
Single plug-in device for the Dacia Dokker MD1CS006 that simultaneously emulates both SCR and DPF systems — eliminates torque loss, warning lamps and limp mode permanently.
The MD1CS006 engine management unit fitted to the Dacia Dokker governs both the AdBlue/SCR emission system and the DPF simultaneously — meaning a fault in either system can trigger torque loss, increased fuel consumption and engine safe-mode events that bring operations to a halt. The Dacia Dokker MD1CS006 AdBlue SCR + DPF Removal Emulator is a single plug-in device that simulates the CAN-bus signals for both systems at once, permanently eliminating all associated fault codes. The same MD1CS006 platform is shared with a wide range of vehicles including Dacia Duster, Dacia Logan, Mercedes-Benz Citan and Nissan NV300, making this emulator a versatile solution across multiple model lines.
How Does It Work?
The emulator plugs into the existing AdBlue/SCR and DPF connectors on the MD1CS006 ECU harness — no wire cutting, no soldering and no software reprogramming required. Once connected, it transmits valid CAN-bus signals to the engine control unit representing normal urea dosing activity, NOx sensor readings and DPF differential pressure data. The ECU reads all values as within specification, generates no fault codes and does not enter limp mode — both systems are handled simultaneously by a single device.
Frequently Asked Questions
Does this emulator disable both SCR and DPF at the same time?
Yes. The MD1CS006 emulator is a single device that simultaneously simulates both the AdBlue/SCR and DPF systems — fault codes for both are cleared permanently in one installation.
Are the Mercedes-Benz and Nissan models listed in the compatibility range also supported?
Yes. Vehicles using the MD1CS006 platform — including Mercedes-Benz Citan, Vito, A-Class (W177), CLA, Nissan NV250 and NV300, and others — are compatible. Share the vehicle VIN for exact confirmation if needed.
Is any ongoing monitoring or maintenance needed after fitting?
After installation, clear any residual codes with an OBD2 scanner and test the vehicle under normal driving conditions. The emulator operates passively and requires no periodic maintenance.
What are the warranty and delivery terms?
All our products carry a 2-year warranty. Please see our returns and warranty policy for details. International shipping is available — contact us for lead times.
Supported Models
This emulator is compatible with the following models that share the same ECU platform:
